Fit Recovery

Home » Cycling » A Few Neat Tricks for Seating those Impossible to Seat Bicycle Tires.

A Few Neat Tricks for Seating those Impossible to Seat Bicycle Tires.

November 2018
M T W T F S S
« Oct    
 1234
567891011
12131415161718
19202122232425
2627282930  
Advertisements

First, and I’ve gotta put this out there because being stranded because you can’t get your tire back on your rim – if you’re using a tire/wheel combo that is next to impossible to get the tire on, try a different brand of tire. Personally, I’ve had a lot of luck with Specialized tires. Michelin tires are fantastic once you get them on the rim, but the task ain’t easy, and therein lies the rub. Carbon wheels can be troublesome, as can tubeless ready wheels.

One important thing to note as well, a tire will stretch a little bit as it breaks in over a couple of weeks of use. Where we get into trouble is if we get a flat in that first couple of weeks.

Now, let’s move on to some decent tips.

  • Never, and I mean this, folks, never use a tire lever to seat a tire, where you stick the lever under the tire bead and over the lip of the rim and push up on the lever. You can wreck your $1,000 carbon fiber rim or put a small puncture in your tube. Now that I said that, why is it okay to use a lever to remove a tire but it’s not okay to use that same lever in that same fashion to seat the tire? I have no idea, but the owner of my shop says “no bueno”, and so does pretty much everyone else (except bucky in the comments). Call me a lemming on this one.
  • For the impossible to get tire, there’s a tool for that. The Kool-stop Tire Jack. They are excellent tools, relatively cheap, and they work. I’ve got one myself. Instructions are included and there are YouTube videos to demonstrate.Kool-stop Tire Jack
  • The Kool-stop is great, but it’s too big and bulky to carry in your saddle bag or in your back pocket. Never fear, there’s another tool that’ll work in a pinch, on the side of the road. Your tire lever. Now, if your perceptive, you’re asking yourself, “what gives”. I know. We’re going to use a special tire lever in a special way that won’t leverage the rim in a possibly destructive manner. I recently bought a set of Park Tool tire levers because they’re tiny. Well, it just so happens that those tiny levers have a bigger curve at the end than most (not the hook, the curve). If I get my Michelin tire to where I simply can’t get it any further with my hands on my carbon fiber rim, I can use the curved end to help the tire in. It takes some hand strength, but it works. I just hold the lever in my hand, slide the hook under the bead and pull on the lever while pushing down on the wheel.SETOFS3
  • Next up, Crank Brothers has a great tire lever they’ve named the “Speedier Tire Lever”. I don’t know how this thing would hold up to the impossible tire, though. Still, check it out, it’s a cool tool. UPDATE: My buddy, Titanium Henry says this one is legit. He’s never found a bead too tight.Crank Bros Speedier Lever
  • I’ve saved the best for last, though. I just found this tire lever after I picked up my Kool-stop Tire Jack. I’ve already forwarded the find to my local shop so they can get a box in so I can purchase mine from them. Var came out with the answer to the KSTJ’s bulky size. Var’s two-piece tire lever (not to be confused with their standard lever) is a stroke of genius. The center piece slides out and is your first tire lever. the hooked end on the main piece is your second – for removing the tire. Then, seat your tire most of the way, set the notched end on one side of the rim, hook the tire bead, and push the lever to seat the tire. Bob’s your uncle. I haven’t tried it yet, but I’ll have one for each saddle bag in short order. This tool is the real deal:var-nylon-tyre-lever-system

So there you have it. What to do about the impossible to seat tire. They’ve got a tool for that.

Advertisements

6 Comments

  1. I use the Crank Bros tool almost exclusively and love it. There has never been a bead too tight with that tool.

  2. buckyrides says:

    The Kool Stop Tire jack looks interesting, I have yet to try that. I tried all the others you mentioned and find pedros levers to be the best. imho.

    I must say I have to disagree with your first bullet point though, after working many years in two pro shops, I would disagree,

    -its all about finesse, on super tight beads – you can use a tire lever to get the bead over the rim, you just have to use a lot of care, skill and patience so you don’t nick the tube or damage the rim. Now I would say never use a metal tool on a carbon rim. I also have some secrets up my sleeve but sworn not to share 🙂 have a good one.

  3. buckyrides says:

    Apologies I intended to say Var, not Koolstop. 🙂 fri writing #amiright

  4. buckyrides says:

    Just you wait till you get to tubeless setups mate! 🙂 then it gets really fun with beads (ornot) 🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: